Auto Plug Wire Seals 7165-0145

Product Parameters

Features:

Package & Shipment:

Package:

We usually use strong poly bag to pack auto cable connectors,100/200/300/500/1000 per bag with label,export standard carton,or according to client’s requirements.Terminals in roll package or bulk packing.Seals will be packed into poly bag as well,the quantity as per the dimention of seals.

Note：

Technical support of auto plug wire seals 7165-0145

For the temperature/humidity cycle test, use a wire with a sheath, and the sheath should be equipped with all plugins (see Figure 6). If the user requirements, can also be connected to the instrument to test four (see figure 7), test plug with wire, should be a plug with wire system allows the minimum and maximum size of wires, the laboratory at the right moment, in the following order for 10 cycle test, each cycle of 24 h, f) of grading test temperature for table 3 grading test temperature.

A) Maintain room temperature T (23±5) ℃, relative humidity 45% ~ 75% for 4h;

B) When the relative humidity was 95%-99%, T was increased to (55±2) ℃ within 0.5h;

C) Keep the result of B for 10h;

D) Reduce T to (-40±2) ℃ within 2.5 hours;

E) Keep the result of D for 2h;

F) Raise T from (-40±2) ℃ to the grading test temperature ±2℃ within 1.5h;

G) Hold for 2h;

H) allowed to return to room temperature (23±5) ° C within 1.5h).

At the end of a trial period, the trial is paused. During the suspension period, the test sample will be stored in the conditions described in a), and the suspension time shall be indicated in the test report.